SEN-000004.with_coins
SEN-000004.scale_topSEN-000004.scale_bottomSEN-000004.with_cable

MQ-2 Smoke/LPG/CO Gas Sensor Module

$8.95


	
	
	
	
SKU: SEN-000004 Category: Tags: ,

Product Description

Overview

This sensor module utilizes an MQ-2 as the sensitive component and has a protection resistor and an adjustable resistor on board. The MQ-2 gas sensor is sensitive to LPG, i-butane, propane, methane, alcohol, Hydrogen and smoke. It could be used in gas leakage detecting equipments in family and industry. The resistance of the sensitive component changes as the concentration of the target gas changes.

Features

  • Continuous Analog output
  • 3-pin interlock connector
  • Low cost and compact size

Standard Working Condition

Symbol Parameter Name Technical Condition Remarks
VC Circuit voltage 5V±0.1 AC or DC
VH Heating voltage 5V±0.1 AC or DC
RL Load resistance adjustable
RH Heater resistance 33Kohm±5% Room temperature
PH Heating consumption Less than 800mW

Environment Condition

Symbol Parameter Name Technical Condition Remarks
TO Operating Temp. -20°C-50°C
TS Storage Temp. -20°C-70°C
RH Relative Humidity <95%
O2 Oxygen Concentration 21%(standard condition) Oxygen concentration can affect sensitivity Minimum value is 2%

Sensitivity Characteristics

Symbol Parameter Name Technical Condition Remarks
RS Sensor Resistance 3Kohm-30Kohm (1000ppm iso-butane) Detecting concentration scope:
200ppm-5000ppm LPG and propane
300ppm-5000ppm butane
5000ppm-20000ppm methane
300ppm-5000ppm H2
100ppm-2000ppm Alcohol
α (3000ppm/1000ppm iso-butane) Concentration slope rate ≤0.6
Standard detecting Condition Temp.: 20°C±2°C VC: 5V±0.1
Humidity:65%±5% VH:5V±0.1
Preheating Time Over 24 hours

Resources

Demo Output

SEN-000004.demoDemo output as the sensor approaches a lit cigarette

FacebookTwitterGoogle+Share

Reviews

There are no reviews yet.

Be the first to review “MQ-2 Smoke/LPG/CO Gas Sensor Module”

Your email address will not be published. Required fields are marked *


9 + two =